Set Mode - Icom IC-41S Instruction Manual

9

SET MODE

■ Set mode
Set mode allows you to change seldom used common set-
tng for the transcever, or ndvdual settng for the operatng
channel. In ths case you can "customze" transcever opera-
ton to sut your preferences and operatng style.
Avalable functons may dffer dependng on the pre-settng
va the optonal CS-41S
NOTE: Set mode can be accessed va the [Top]
key operaton after turnng power ON wth [CH Up] and [CH
Down] (p. 15.) In ths case, all set mode tems are avalable.
D Set mode construction
• Own ID
• Roger Beep
• Scan Restart
• Scan Stop Timer
34
.
cloning software
(Set Mode)
• Squelch Level • CTCSS/DTCS
Starting item
• Lock-out • TOT
D Set mode operation
q P ush and hold [Top]
• When no key s pushed for 30 sec. the transcever returns to
normal operaton.
w Push [Top]* to select the desred tem, f necessary.
e P ush [CH Up] or [CH Down] to select the desred cond-
ton of the tem.
r Rotate [VOL] to turn the power OFF, or push and hold
[Top] for 2 sec. to ext set mode.
(Set Mode)
*Regardless of the assgned key functon.
• Auto Power OFF • Backlight
[Top]
: Push
• Power Save • Signal Moni
for 2 sec. to enter Set mode.
(Set Mode)
• Beep
• Beep Level
• Mic Gain
• Battery Voltage