Priority Channel Setting - Icom IC-41S Instruction Manual

■ Priority channel setting

The prorty channel, smply recalled by pushng
and also s automatcally montored durng the prorty scan.
You can set the only one channel as the prorty channel.
"P" appears when the prorty channel s set.
D The priority channel selection
➥ Push to select the prorty channel.
(PRIO)
• "N/A" appears when the prorty channel s not set.
The priority channel
is selected.
D Set the priority channel
,
(PRIO)
q Select the desred channel. (p. 11)
w Push and hold
D Cancel the priority channel setting
➥ Push [Top]
When the priority
channel is not set.
BASIC OPERATION
(PRIO Set)
played channel as the prorty channel.
to enter the functon mode, then push
(Functon)
and hold for 2 sec. to cancel the prorty
(PRIO Clear)
channel settng.
• "P" dsappears.
3
for 2 sec. to set the ds-
The selected channel is set
to the priority channel.
The priority channel
is cancelled.
3
13