Scanning Preparation - Icom IC-41S Instruction Manual

5
SCAN OPERATION

Scanning preparation

■
IC-41S scans all tagged channels, and can be selected so
the scan resume condton s a pause or tmer scan.
Therefore, these tems must be set before startng a scan
(except the repeater search scan). These tems must be set
for each scan type (open, group and prorty) ndependently.
D Scan type selection
➥ Push
(Scan Mode)
scan type.
• Open, group and prorty scans are avalable.
• "OPEN", "GROUP" or "PRIO" s dsplayed for 1 sec. when each
scan type s selected.
Open scan is selected.
Push
Group scan is selected.
Priority scan is selected.
18
several tmes to select the desred
Appears
Push
Appears
Appears
Push
D Tag channel setting
q Select the desred scan type. (See at left.)
w Select the desred channel. (p. 11)
e Push and hold
(Scan Tag)
channel settng ON and OFF.
• "S" appears when the tag settng s ON (The channel s set as
a scan channel).
Appears
To speed up scanning:
For open scan, cancel the tag channel settng to skp un-
desred channels such as usually busy channels.
For group scan, set only often-used channels as tag
channels.
All memory channels may be set as tag channels by de-
fault.
for 2 sec. to toggle the tag