Selcall Operation; QuEt Mode OperatOn; Stun FunctOn - Icom IC-41S Instruction Manual

■ Quiet mode operation
When the quet mode operaton s turned ON, the SelCall
mute s actvated and allows the slent operaton untl recev-
ng a SelCall.
➥ Push [Top]
to enter the functon mode, then
(Functon)
push to toggle the quet mode ON and OFF.
(Quet)
• "Q" appears when the quet mode s n use.
To monitor the channel:
➥ Push [Side1]
to release the mute (audo s emt-
(Montor)
ted.)
• " " blnks when the montor functon s n use.
Blinks
Appears

SELCALL OPERATION

To enable SelCall mute:
➥ When " " blnks, push [Side1]
channel.
• " " dsappears.
NOTE: The unmute condton may automatcally return to
the mute condton after a specfied tme perod depend-
ng on the pre-settng.
■ Stun function
When the specfied ID, set as a kller ID, s receved, the stun
functon s actvated. (PC programmng s requred.)
When the kller ID s receved, the transcever swtches to
the password requred condton. Enterng of the password
va the keypad s necessary to operate the transcever agan
n ths case. (p. 10)
7
to mute the
(Montor)
7
29