Battery Case; OptOnal Battery Case (Bp-240) - Icom IC-41S Instruction Manual

■ Optional battery case (BP-240)
When usng the optonal battery case, nstall 6 × AAA (LR03)
sze alkalne batteres as llustrated at rght.
q Unhook the battery cover release hook (q), and open the
cover n the drecton of the arrow (w). (Fg.1)
w Then, nstall 6 × AAA (LR03) sze alkalne batteres. (Fg.2)
• Install the alkalne batteres only.
• Be sure to observe the correct polarty.
• Do not pn the rbbon under the batteres.
e Ft the cover n the drecton of the arrow (e), then close
(r). And hook the battery cover release hook untl t
makes a 'clck' sound (t). (Fg.3)
CAUTION:
• When nstallng batteres, make sure they are all the
same brand, type and capacty. Also, do not mx new
and old batteres together.
• Keep battery termnals clean. It's a good dea to clean
battery termnals once a week.
• Never ncnerate used battery cells snce nternal battery
gas may cause them to rupture.
• Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wpe t dry before usng t.
NOTE: When the optonal battery case s attached, the
battery type must be selected to dry battery mode when
turnng the transcever ON. (p. 10)

BATTERY CASE

Fig.1
w
Fig.2
Fig.3
r
11
BP-240
q
e
t
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
43