Open Scan - Icom IC-41S Instruction Manual

D Setting scan resume condition
q Push and hold [Top]
(Set Mode)
mode.
w Push [Top]* several tmes untl "S-TIME" appears.
e Push [CH Up] or [CH Down] to select the scan resume
tmer.
• 5 : Scan pauses for 5 sec. then resumes.
• 10 : Scan pauses for 10 sec. then resumes.
• 15 : Scan pauses for 15 sec. then resumes.
• P5 : Scan pauses untl the sgnal dsappears, then re-
sumes 5 sec. after the sgnal dsappears.
r Rotate [VOL] to turn the power OFF, or push and hold
[Top] for 2 sec. to ext set mode.
(Set Mode)
[
for 2 sec. to enter set

■ Open scan

Open scan searches for beng transmtted sgnals automat-
cally and makes t easer to locate new statons for contact
or lstenng purposes.
IMPORTANT!:
Open scan can transmt on a start channel or busy chan-
nel.
q Push several tmes to select the open
(Scan Mode)
scan. (p. 18)
• " " appears.
Open scan is selected.
w Push to start the open scan.
(Scan)
t When recevng a sgnal, scan pauses and resumes accord-
ng to the selected scan resume condton. (p. 19)
y Push to cancel the scan.
(Scan)
SCAN OPERATION
Appears
Blinks
Scan start channel
5
5
19