D Transmitting An Individual Call - Icom IC-41S Instruction Manual

t Push [CH Up] or [CH Down] to set the desred code.
• Select "" when group code s set.
y Push to set the dgt and the edtable
(TX Code CH)
dgt move to rght automatcally.
u Repeat step t and y to nput all allowed dgts.
i After settng the last dgt, push
the code and return to the TX code channel selecton
mode.
o Push [PTT] to transmt to the selected TX code channel,

D Transmitting an individual call

to set
(TX Code CH)
➥ Push [Top]
SELCALL OPERATION
or push to set the selected TX code
(TX Code CH)
channel and return to the stand-by mode.
Appears
Transmitting
NOTE: The TX code edtable dgt can only be set/
changed wth the optonal CS-41S
to enter the functon mode, then
(Functon)
push and hold for 2 sec. to transmt.
(Call)
Appears
Transmitting
7
.
cloning software
7
27