DSplay BacklGhtNg; Set Mode; Basic Operation - Icom IC-41S Instruction Manual

■ Display backlighting
The transcever has dsplay backlght for nght-tme operaton.
q Push and hold [Top]

(Set Mode)

mode.
w Push [Top]* several tmes untl "LIGHT" appears.
e Push [CH Up] or [CH Down] to select the dsplay back-
lght condton.
• ON : Backlght lghts contnuously.
• A2 : Lghts for 5 sec. when any key except [PTT] s pushed, or
the LCD ndcaton s changed.
• AT : Lghts for 5 sec. when any key except [PTT] s pushed or
the Selcall sgnal s transmtted/receved.
• OF : Backlght never lghts.
r Rotate [VOL] to turn the power OFF, or push and hold
[Top] for 2 sec. to ext set mode.
(Set Mode)
*Regardless of the assgned key functon.
[
for 2 sec. to enter set
■ Set mode
Set mode s accessed at power ON and allows you to set
seldom-changed settngs. In ths case you can "customze"
the transcever operaton to sut your preferences and oper-
atng style. See p. 34 for set mode tems detal.
Entering the set mode:
q Whle pushng and holdng [CH Up] and [CH Down],
rotate [VOL] to turn the power ON. Then, push and hold
[Top] for 2 sec. to enter set mode.
(Set Mode)
w Push [Top]* several tmes to select the approprate tem.
Then push [CH Up] or [CH Down] to set the desred
level/condton.
• Avalable set mode functons are SQL Level, CTCSS tone/
DTCS code, Auto power OFF, Backlight, Beep, Beep Level,
Mic Gain, Battery Voltage, Signal Moni, Power Save, TOT,
Lock-out, Scan Stop Timer, Scan Restart, Roger Beep and
Own ID.
e Rotate [VOL] to turn the power OFF, or push and hold
[Top]
for 2 sec. to ext set mode.
(Set Mode)
NOTE: Set mode can be accessed va the [Top]
key operaton only (p. 34.) In ths case, set mode
Mode)
allows qucker tem selecton. Set "Enable" to the most
often used tems wth the CS-41S
*Regardless of the assgned key functon.
3

BASIC OPERATION

(Set
.
cloning software
3
15