D Scan Resume Timer; Lockout Function - Icom IC-41S Instruction Manual

D Time-Out timer (TOT)
The Tme-Out Tmer (TOT) functon lmts contnuous trans-
msson to prevent accdental prolonged transmsson, etc.
Ths tmer cuts a transmsson OFF after 1 mn. of contnu-
ous transmsson.
TOT OFF (default)
D Lockout function
Select the transmsson lockout (temporary transmsson n-
hbt) capablty.
RP : Transmsson s permtted only whle
(Repeater Lockout)
recevng a matched CTCSS tone, or
recevng no sgnal.
BU : Transmsson s nhbted whle recev-
(Busy Lockout)
ng a sgnal.
OF : No restrcton for recevng a sgnal.
(OFF)
Lockout OFF (default)
TOT ON
Repeater lockout setting

D Scan resume timer

The scan resume condton can be set as a pause (P5) or
tmer scan (15/10/5). When a sgnal dsappears, scan re-
sumes after 5 sec. has passed regardless of the settng.
15/10/5 : Scan pauses for 15, 10 or 5 sec. when a sgnal s
detected, then resumes after that.
P5 : Scan pauses untl the sgnal dsappears and then
resumes after 5 sec.
Scan resume timer
P5 (default)
D Scan restart function
Ths functon starts the scan after the transmsson s per-
formed durng scan and 10 sec. has passed.
Scan restart timer
OFF (default)
9
SET MODE
10 sec. setting
Scan restart timer ON
9
37