D Tx Code Number Edit - Icom IC-41S Instruction Manual

7
SELCALL OPERATION
r Push [PTT] to transmt to the selected TX code channel,
or push
(TX Code CH)
channel and return to the stand-by mode.
Appears
✓ CONVENIENT!
The TX code channel name can be assgned to the all 32 TX
code channel va the optonal CS-41S
The TX code channel name allows you to easy to select the
channel, find the channel user, and so on.
26
to set the selected TX code
Transmitting
cloning software

D TX code number edit

enables you to change the TX code con-
(TX Code CH)
tents wthn the allowable dgts.
The group call functon works by allowng you to edt a spe-
cal 'group code' nto the last 2 dgts poston of the SelCall
ID code.
To edit a TX code:
q Select the desred CB channel ('CB-XX') except for chan-
nels 5 and 35. (p. 11)
w Push [Top]
(Functon)
push
(TX Code CH)
.
lecton mode.
• Push [CH Up] or [CH Down] to select the desred TX code
channel, f desred.
e Push and hold
the TX code edt mode.
The editable digit starts blinking
r Push
(TX Code CH)
edted.
to enter the functon mode, then
to enter the TX code channel se-
for 2 sec. agan to enter
(TX Code CH)
to select the desred dgt to be