TransmTtNg Dsc Calls; D Transmitting An Individual Call - Icom IC-M411 Instruction Manual

➥A dstress alert contans (default);
• Nature of dstress : Selected nature of the dstress
• Poston data : GPS or manual nput poston data s held
for 23.5 hrs or untl the power s turned OFF.
➥ The Dstress call s repeated every 3.5–4.5 mn., untl re-
cevng an 'acknowledgement.' ('Call repeat' mode)
• "RE-TRANSMISSION" s dsplayed.
➥ Push [DISTRESS] to transmt a renewed Dstress call,
f desred.
➥Push [CLR] to transmt a the 'Cancel ACK' call to can-
cel the 'Call repeat' mode.
• "CANCELED" s dsplayed.
➥ "??" may blnk nstead of poston and tme ndcatons
when the GPS data s nvald, or has not been manu-
ally updated after 4 hours.
n Transmitting DSC calls
To ensure correct operaton of the DSC functon, please
make sure you set the squelch correctly. (p. 7)

D Transmitting an Individual call

The Indvdual call functon allows you to transmt a DSC sg-
nal to a specfic shp only.
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "INDIVIDUAL," push [ENT].
e Push [Y] or [Z] to select the desred pre-programmed
Indvdual address, push [ENT].
• The ID code must be set n advance. (p. 14)
6
DSC OPERATION
Scrolls
Scrolls
☞ Contnue to the next page
6
21