Prepare The Computer - Power Computing PowerTower Pro User Manual

Chapter 6, Adding Memory

Prepare the computer

1.
If you havenÕt done so, remove the cover from the computer.
See ÒRemoving the cover,Ó starting on page 67 for instructions.
Make sure the computer is powered down before removing the cover.
WARNING!
Touch the metal plate over the power supply to discharge any static
CAUTION!
electricity that might have built up on your clothes or body.
The system must be plugged in (see step 2 on page 68) for this to work.
Use an anti-static grounding strap and handle DIMM modules by the non-
metallic edges only.
2.
Set the computer upright.
Starting with the top bezel tab, push on the three tabs on the left side
which hold the bezel in place.
Press up on the top tab and down on the other two, and pull the tabbed
side of the bezel away from the case until the tabs on the other side of the
bezel clear the front of the computer, and set the bezel aside.
74
PowerTower Pro UserÕs Guide
For Technical Support, Call 1-800-708-6227