Power Computing PowerTower Pro User Manual page 33

The Macintosh-standard monitor port allows you to connect a monitor with a
Macintosh-style connector.
The VGA monitor port allows you to connect a standard VGA or SVGA monitor and
use a PC-style connector.
CAUTION: Do not connect monitors to both video ports simultaneously.
Use the
conÞgured. See Macintosh Guide (available through the Guide menu, marked with
the top right corner of your screen, or the Mac OS manual that came with your system) for
additional information about using the
Connecting the monitor involves two steps: plugging in the monitor and connecting the
monitor cable.
To plug in the monitor:
1.
Place the monitor on the location you have chosen.
2.
If necessary, connect the power cord to the monitor.
Some monitors have permanently attached power cords.
3.
Connect the monitor power cable into a grounded, three-hole electrical
outlet.
To connect the video cable:
1.
If necessary, attach the video cable to the monitor.
Some monitors have video cables permanently attached.
For Technical Support, Call 1-800-708-6227
Monitors and Sound control panel in Mac OS to control how the monitor is
Chapter 1, Getting Started
control panel.
Monitors and Sound
PowerTower Pro UserÕs Guide
) in
5