Power Computing PowerTower Pro User Manual page 31

For your safety, the computer is equipped with a three-prong plug
WARNING!
designed to be used with a grounded electrical outlet. If you do not have
access to an appropriate outlet, have an electrician install one. Do not
use your computer with a three-prong adapter in an ungrounded outlet.
To plug in the computer:
CAUTION: Do not press the power switch on the front panel of the computer or the
keyboard power switch until you have completed all of the setup instructions.
1.
Place the computer in the location you have chosen.
2.
Set the 115/230 volt switch to the correct setting for your country.
Set the switch to 115 volts for the U.S., Canada, and Japan. Use the 230-volt setting in
most European countries.
3.
Connect the socket end of the power cord to the power input plug on the
back of the computer.
4.
Plug the prong end of the power cord into a grounded, three-hole
electrical outlet. If you have any expansion cards to be installed at this
time, follow the instructions in Chapter 5, ÒInstalling PCI Expansion Cards,Ó
on page 55 to install them now.
For Technical Support, Call 1-800-708-6227
Chapter 1, Getting Started
PowerTower Pro UserÕs Guide
3