Power Computing PowerTower Pro User Manual page 96

Chapter 6, Adding Memory
5.
A. Grasp the inset panel handle and slide the right side panel back about
an inch.
B. Gently, but Þrmly, pull the top of the side panel to the rear and away
from the chassis.
Set the side panel aside.
6.
Lay the computer down with its open side up and rotate it so that the base
faces you.
7.
Before touching any components inside the computer, touch the metal
plate over the power supply to discharge any static electricity that might
have built up on your clothes or body.
The system must be plugged in (see step 2 on page 68) for this to work.
70
PowerTower Pro UserÕs Guide
For Technical Support, Call 1-800-708-6227