Table of Contents
Advertisement
6.
Push the card into the PCI socket until it is Þrmly seated.
Do not force the card. If you feel a lot of resistance, pull the card out, realign it, and
insert it again.
7.
Replace and tighten the slot cover screw you removed earlier.
8.
If you have no more internal components to install, replace the side panel,
and the thumb screws which hold it in place, and re-connect everything.
Be careful not to get any of the cables caught in the side panel or the
CAUTION!
case when you put the panel back on the computer.
To prevent electrical shock, always replace the side panel before turning
WARNING!
on the computer.
For Technical Support, Call 1-800-708-6227
Chapter 5, Installing PCI Expansion Cards
PowerTower Pro UserÕs Guide
65
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the PowerTower Pro and is the answer not in the manual?
Questions and answers