Power Computing PowerTower Pro User Manual page 141

5.
Slide the drive into the bay from the front, being careful not to crimp or
fold any cables.
Install the drive so that it faces up; if it isnÕt clear which way the drive should face (e.g.
hard drives), assume that the SCSI connector (see illustration at the beginning of this
procedure) should be in the back and the SCSI connector key should face up.
6.
Secure the drive to the bottom 5.25 inch drive bay rack position by
replacing the four bottom drive bay rack screws.
For Technical Support, Call 1-800-708-6227
Chapter 7, Installing Internal Drives
PowerTower Pro UserÕs Guide
bottom drive
bay rack
screws
115