Chapter 6 Adding Memory; Required Tools; Removing The Cover - Power Computing PowerTower Pro User Manual

6
Chapter
This chapter explains how to enhance the processing and video capabilities of your computer
by adding additional memory.

Required tools

A small regular (slot-head) screwdriver or a small coin.
A small Phillips-head screwdriver.

Removing the cover

To install additional memory, you must Þrst remove the computerÕs cover.
1. If you are not proÞcient with electronic equipment, Power Computing
CAUTION!
Corporation recommends that you have a certiÞed technician install RAM,
drives, and expansion cards. If you attempt to install RAM, drives, or cards
yourself, any damage you may cause to your equipment will not be
covered by the limited warranty on your computer. Please call technical
support at 1-800-708-6227 for additional information about this or any
other warranty question.
2. If an anti-static bracelet is available, put it on and ground it to the
computer chassis before touching any components inside the computer.
3. Never turn the computer on or operate the computer with the cover
removed.
For Technical Support, Call 1-800-708-6227
Adding Memory
PowerTower Pro UserÕs Guide
6
67