Replacing And Installing Drives In The Front 3.5 Inch Rack Positions - Power Computing PowerTower Pro User Manual

Chapter 7, Installing Internal Drives
Replacing and installing drives in the
front 3.5 inch rack positions
Once you have prepared the drive (see ÒPrepare the drive,Ó starting on page 100), you are
ready to install the drive.
Connectors are keyed, which means that there is only one correct way to mate them. If
a cable is very hard to connect, examine it carefully to make sure you have it oriented
so that it Þts the connector it goes onto. Once cables are connected, make sure they are
snug.
1.
If you are installing a removable-media drive, remove the plastic bezel
insert covering the bay you are planning to use. To remove the insert,
press it out from the inside.
The plastic insert is very ßexible and should pop out quite easily.
plastic
bezel
insert
bezel
130
PowerTower Pro UserÕs Guide
For Technical Support, Call 1-800-708-6227