Power Computing PowerTower Pro User Manual page 157

2.
If you are installing a removable-media drive, unscrew the two screws
holding the metal bay cover, if there is one, in front of the drive bay and
set them aside.
Note:
by thin strips of metal. To remove that type of plate, simply bend it back and forth
several times until it comes loose, and remove it.
For Technical Support, Call 1-800-708-6227
The 3.5 inch slots may have metal plates without screws, which are attached
Chapter 7, Installing Internal Drives
screws
PowerTower Pro UserÕs Guide
metal bay cover
131