Prepare the computer
If you haven't done so, remove the cover from the computer.
See Required tools, starting on page 71 for instructions.
WARNING!
Make sure the computer is powered down before removing the cover.
CAUTION: Touch the metal plate over the hard disk drive to discharge any
static electricity that might have built up on your clothes or body.
The system must be plugged in (see step 1 on page 72) for this to work.
CAUTION: Use an anti-static grounding strap and handle memory
modules by the non-metallic edges only.
For Technical Support, Call 1-800-708-6227
PowerCenter Pro User's Guide
Adding Memory
79