Prepare The Computer - Power Computing PowerWave 604 User Manual

Prepare the computer

1.
If you havenÕt done so, remove the cover from the computer.
See ÒRemoving the cover,Ó starting on page 15 for instructions.
Make sure the computer has been shut down before removing the cover.
WARNING!
2.
Before touching any components inside the computer, touch the metal
plate over the hard disk drive to discharge any static electricity that might
have built up on your clothes or body.
metal plate
3.
Disconnect the speaker connector, which is on the motherboard to the
right of DIMM bank A.
For Technical Support, Call 1-800-708-6227
Upgrading Your Computer
PowerWave 604 UserÕs Guide
DIMM
bank A
37