Removing The Cover - Power Computing PowerTower Pro User Manual

3.
Install a drive rail on the right side of the drive.
If you are installing a drive in a 5.25 inch drive bay, install a drive rail on the right side
of the drive. The end of the rail with the ßexible tab goes toward the front. If rails did
not come with your drive, they are available from Power Computing for a nominal fee
through our Sales Department at 1-800-999-7279. Rails, as well as adapter trays for
installing 3.5 inch drives in the 5.25 inch bays, are also available at most computer parts
stores.

Removing the cover

In order to install internal drives into your system, you must Þrst remove the computerÕs
cover.
1.
Shut down the computer and turn off the monitor, but leave the computer
plugged in to the electrical outlet.
Leaving the computer plugged in ensures that it is grounded.
2.
Disconnect everything but the power cord from the back of the computer.
3.
Rotate the computer so that its rear panel faces you.
For Technical Support, Call 1-800-708-6227
ßexible
tab
Chapter 7, Installing Internal Drives
PowerTower Pro UserÕs Guide
right side rail
103