Chapter 24 Firewall
Table 116 Configuration > Firewall > Session Limit (continued)
LABEL
#
User
Address
Limit
Apply
Reset
24.3.1 The Session Limit Add/Edit Screen
Click Configuration > Firewall > Session Limit and the Add or Edit icon to
display the Firewall Session Limit Edit screen. Use this screen to configure
rules that define a session limit for specific users or addresses.
Figure 319 Configuration > Firewall > Session Limit > Edit
The following table describes the labels in this screen.
Table 117 Configuration > Firewall > Session Limit > Edit
LABEL
Create new
Object
Enable Rule
Description
440
DESCRIPTION
This is the index number of a session limit rule. It is not associated with
a specific rule.
This is the user name or user group name to which this session limit rule
applies.
This is the address object to which this session limit rule applies.
This is how many concurrent sessions this user or address is allowed to
have.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this
screen.
Select this check box to turn on this session limit rule.
Enter information to help you identify this rule. Use up to 64 printable
ASCII characters. Spaces are allowed.
ZyWALL USG 1000 User's Guide