Set Ip And Gateway Addresses And Mib System Group; Figure 6 Ip Address For The Snmp Solo And More - Tripp Lite SNMP Solo MT-SE-37/02 Owner's Manual

Tripp lite snmp owner's manual

Table of Contents

SNMP Solo

Set IP And Gateway Addresses

And MIB System Group

To set the IP address, Gateway address, MIB system group,

and other system configurations, type 1 at the prompt. The

following screen displays:

NOTE:

The minimum requirement to operate SNMP Solo is to set

the IP address.

To enter values, enter the number of the option, type a

<space>, and enter the name. Press <enter>. Your new value

displays next to the field heading on the top of the screen.

If you want to return to the Main Menu, press 0 (zero) and press

<enter>.

For more information on IP addresses and net masks, see the

Reference section of the Appendix in this manual.

Configuration

Table of Contents

Snmp solo