Power Connection; Power: Console Server Management Switch; Power: Console Server With Poweralert - Tripp Lite B092-016 Owner's Manual

 Unpack your Console Server kit and verify you have all the parts shown above, and that they all
appear in good working order.
 If you are installing your Console Server in a rack you will need to attach the rack mounting
brackets supplied with the unit, and install the unit in the rack. Take care to head the Safety
Precautions.
 Proceed to connect your Console Server to the network, to the serial ports of the controlled
devices, and to power as outlined below.
2.2

Power Connection

2.2.1

Power: Console Server Management Switch

The B096-048/16 Console Server Management Switch has dual universal AC power supplies with auto
failover built in. These power supplies each accept AC input voltage between 100 and 240 VAC with a
frequency of 50 or 60 Hz and the total power consumption per Console Server is less than 30W. Two IEC
AC power sockets are located at the rear of the metal case, and these IEC power inlets use conventional
IEC AC power cords. A North American power cord is provided by default. Power cords for other regions
are available separately from Tripp Lite.
2.2.2

Power: Console Server with PowerAlert

The standard B092-016 Console Server has a built-in universal auto-switching AC power supply. This
power supply accepts AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz and
the power consumption is less than 40W.
Connectors
DB9F-RJ45S straight and cross-over
External power supply
Quick Start Guide and CD-ROM
16