Kit Components: B092-016 Console Server With Poweralert; Kit Components: B095-004-1E And B095-003-1E-M Console Server - Tripp Lite B092-016 Owner's Manual

 Unpack your Console Server Management Switch kit and verify you have all the parts shown
above, and that they all appear in good working order.
 If you are installing your Console Server Management Switch in a rack you will need to attach
the rack mounting brackets supplied with the unit, and install the unit in the rack. Take care to
head the Safety Precautions.
 Connect your Console Server Management Switch to the network, to the serial ports of the
controlled devices, and to power as outlined below.
2.1.2

Kit Components: B092-016 Console Server with PowerAlert

 Unpack your Console Server and verify you have all the parts shown above, and that they all
appear in good working order.
 If you are installing your Console Server in a rack, you will need to attach the rack mounting
brackets supplied with the unit, and install the unit in the rack. Take care to heed the Safety
Precautions listed earlier.
 Proceed to connect your B092-016 to the network, to the serial and USB ports of the controlled
devices, to any rack side LCD console or KVM switch and to power as outlined below.
2.1.3

Kit Components: B095-004-1E and B095-003-1E-M Console Server

B092-016
Console Server with PowerAlert
2 x Cable UTP Cat5 blue
Connector DB9F-RJ45S straight and DB9F-
RJ45S cross-over
AC power cable
Quick Start Guide and CD-ROM
B095-004-1E 4-port Console Server with
single NIC or B095-003-1E-M 3-port
Console Server with single NIC and modem
2 x Cable UTP Cat5 blue
15