Environmental Alerts; Environmental Status - Tripp Lite B092-016 Owner's Manual

 Click Add.
 Enter a Name and Description for the EMD and select pre-configured serial port that the EMD
will be Connected Via.

Provide Labels for each of the two alarms.

Check Log Status and specify the Log Rate (minutes between samples) if you wish the status
from this EMD to be logged. These logs can be views from the Status: Environmental Status
screen.

Click Apply.
8.3.2

Environmental Alerts

You can now set temperature, humidity and probe status alerts using Alerts & Logging: Alerts (refer to
Chapter 7).

8.3.3 Environmental Status

You can monitor the current status of all of EMDs and their probes:
124