Special Features; Soft Keys - imagistics DL170 Operating Manual

Special features

Your fax machine has numerous special features to make your communication eas-
ier. We'll cover them here.

Soft keys

Soft Keys are shortcut keys. You can program the soft keys on the control panel to
turn on or off any function with just the touch of a button. Your machine has three
Soft Keys. If the light above any one of these keys glows, that means the function /
feature programmed into that key is ON.
These keys are programmed at the factory to turn the following functions on or off:
• To print a confirmation report after sending (see page 3.22)
• To scan document to memory before transmission (see page 2.3)
• Monitor (on-hook-dial) / Call request (see pages 2.6 and 3.25)
Note: The keys that are programmed at the factory turn the functions above them
on and off, but only for the next transmission that you send from your fax
machine. Once that transmission is complete, your machine returns to its
default setting.
Instead of using the Soft Keys to control the functions above, you can program them
to turn these other functions on or off:
• Energy saving (see page 4.9)
• Fax & Copy (see page 3.21)
• Send TTI (see pages 1.18 and 4.2)
• Security reception (see page 3.50)
• Cover page (see page 3.23)
• Sort copy (see pages 2.13 and 2.16)
• Negative / Positive copy (see page 2.16)
• Combine (see page 2.17)
• Copy / Fax mode (see page 1.11)
Note: Unlike the factory-set keys which only change the next transmission, set-
ting the Soft keys for one of the above functions changes the default state.
In other words the selected feature will stay ON (or OFF) until the soft key
is pressed again. These default settings can be changed, if
necessary. They are not permanent.
Setting the Soft Key
1
Press Program key, , 1, 0, 3,
B
Select Soft Key No.
1:Report
. . . or indicates another function you've stored into this key.
2
Press or until the Soft Key (1-3) you want to change appears. In this
example, we've chosen 3.
3
Press . The shows:
ENTER LCD
3:Monitor/Call
/ /Enter
4
Press or until the function appears that you want to program into the
key. In this example, we've chosen Cover page.
3:Cover Page
/ /Enter
5
Press to save the setting.
ENTER
The will display the next Soft Key.
LCD
If you do want to set this Soft Key, go back step 3.
If you do not want to set the currently displayed Soft Key but do want to set
another Soft Key, go back to step 2.
If you do not want to set any more Soft Keys, press
Now you can use the labels included in your machine's original packaging to label
the Soft Key function you just set.
Advanced features
. The shows:
ENTER LCD
to finish.
STOP
3.17