imagistics DL170 Operating Manual page 27

Hide thumbs Also See for DL170:
Table of Contents

Advertisement

Level one function
Level two function
B. User Settings
2.Fax Settings
3.Copy Settings
4.Printer Settings
C. Other Settings
1.Journal & Reports
2.Cover Page
*3: This option appears only if the optional NIC (network interface card) has been installed.
Level three function
Summary of setting
03.# of Rings
Number of rings before your machine answers.
04.Redial
Number of times and interval for automatic fax redialing.
05.Dialing Pause
Dialing pause length.
06.Memory Tx
On/Off setting for Memory transmission.
07.Quick Memory Tx
On/Off setting for Quick Memory transmission.
08.TTI Tx
On/Off setting for sending your TTI.
09.ECM Mode
On/Off setting for ECM mode.
10.Block Junk Fax
Reject the fax reception from unauthorized incoming faxes.
11.Security Rx
Keep all received fax messages in memory and after print them.
12.PIN Mode
Prevent unauthorized long—-distance calls.
13.Passcode
Enter passcode for securing polling access.
14.Rotate Rx
On/Offsetting for Rotate Rx.
Set the ring pattern to use with phone company's Distinctive Ring Off
15.DRD
service.
01.Scan Parameters
You can set the following settings for copying.
• Primary document type
• Primary contrast mode
02. Print parameter
You can set the margin for copying.
03.Auto Reset Time
Set the time (minutes) of resetting the copy parameters.
04.Copy Auto
Set the default setting to "Auto" for one of the following:
• Paper size • Reduce/Enlarge ratio • Document size
05.Copy Protect
On/Off setting for Copy protection.
06.Sort Copy
On/Off setting for Sorting copy
07.Nega/Posi
On/Off setting to reverse copy of black and white areas.
08.Combine
On/Off setting to combine.
01.TCP/IP*
Enter the IP Address, Subnet mask and Gate way address.
3
01.Journal Auto Print
Print the Activity journal automatically after 100 transactions.
02.Journal Line Up
Change the printing order of the activity journal.
03.Set Report Type
Select TCR (Transmit Confirmation Report) or
RCR (Receive Confirmation Report).
01.Set Cover Page
On/Off setting for sending the Cover page.
02.Enter Cover Page
Enter your message for the cover page.
Getting started
Default setting
Page
Two times
4.4
Two times
4.5
One minute
Two times
4.5
On
4.2
On
4.2
On
4.2
On
4.1
Off
3.54
Off
3.50
Off
3.52
—-
3.16
Off
4.4
3.24
Text
4.6
Normal
24 mm
4.6
3 minutes
4.7
Paper size
4.7
Off
2.18
On
2.16
Off
2.16, 4.7
Off
2.17, 4.7
-
4.11
Off
3.21
Off
3.22
TCR
3.22
Off
3.23
3.24
1.15

Advertisement

Table of Contents
loading

Table of Contents