imagistics DL170 Operating Manual page 83

Erase Tx Doc — Erasure of transmitted documents tells your machine if it
should erase a document from the box after a caller retrieves (polls) the
document.
Erase Tx Doc.
/ /Enter
On: Your machine erases the document from the box as soon as it sends it. If
you choose "On", this box can be polled only once per document.
Off: Your machine does not erase a document from the box when it's polled.
As long as your machine holds
ment from the box, the document is available indefinitely for polling.
Press or until the mode you want appears.
Press to save the setting. Then skip to step 24.
ENTER
If you chose Security:
17
The machine asks how long you want to keep a document stored in your
machine's F-Code box. The
LCD
F-Code Doc Hold Time
Hold Time (00-31):00
18
Use the numeric keypad to enter a two-digit number indicating how many
days (00-31), you want your fax machine to keep received documents in this
F-Code box. Here, we've entered 09, for nine days:
F-Code Doc Hold Time
Hold Time (00-31):09
Note: Your fax machine can store incoming documents in F-Code boxes (up
to 30 documents) as long as 31 days, after which it automatically
erases the documents. But if your machine has plenty of memory, you
may want to override the 31-day limit in order to keep the documents
indefinitely. If so, enter 00. If you choose this, you will have to delete
documents manually. (You may want to contact the Imagistics
diagnostic center regarding optional memory expansion.)
19
Press to save the settings. Skip to step 24.
ENTER
If you chose Relay:
20
The machine asks for the fax number for the remote unit (where to send a
document). The shows:
LCD
Enter Relay Number
_
:Off
power and you do not erase the docu-
AC
shows:
21
Enter the fax number using a one-touch key, a speed-dial number or a call
group number. You cannot use the numeric keypad to enter these numbers.
To add each fax number, press
comma, then enter the number. You can specify up to 200 numbers for a
remote unit.
Enter Relay Number
S001,G12_
22
Press to save the settings. The
ENTER
Select TTI :Sender
/ /Enter
The machine asks for the type of
relayed to other callers.
• Sender — Relay the document with sender unit's
• Both — Relay the document with both the sender unit's
• Yours — Relay the document with your
Press or until the mode you want appears.
23
Press to save the settings. The
ENTER
Auto Print :Off
/ /Enter
On: Print the document automatically when it's received.
Off: The machine does not print it, but only relays it to the other machine.
Press or until the mode you want appears.
Then press to save the settings and go on to step 24.
ENTER
24
The machine asks for your F-Code box's four-digit security
the . . code for the box's security, which you use to (1) print a document any
I D
remote F-Code-compatible fax sends to this F-Code box or (2) you enter before
you can make any changes to this F-Code box.
03:Set F-Code Box
Enter I.D. Code:0000
If you do not want to change the
25
Decide on a four-digit . . code (0001-9999) for this F-Code box.
I D
Write it down, and put it in a safe place.
Important: Do not use 0000 as an
Advanced features
between each one to insert a
BROADCAST
shows:
LCD
you want to appear on the faxes that are
TTI
(don't send your
TTI
and your
TTI
instead of the sender unit's.
TTI
shows:
LCD
. . code. This is
I D
. . code, skip to step 27.
I D
. . code.This disables the code.
I D
).
TTI
.
TTI
3.29