imagistics DL170 Operating Manual page 58

Advanced features
One-touch fax dialing
To dial a fax call using a one-touch number:
1
Place the the document in the
2
If you are using the glass, enter the document size by pressing the
FBS
.
DOCUMENT SIZE
3
Adjust resolution and contrast if necessary.
4
Press the one-touch key in which you've stored the number.
What happens next depends on whether you specified memory transmission or
real time transmission:
If you specified Quick Memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The shows the Location
LCD
PB DALLAS
LTR Normal
Note: If the entry doesn't have a Location
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.3.)
If you specified normal memory transmission:
• Your fax machine scans your entire document into memory first, then dials the
other fax machine.
• The shows the Location
LCD
PB DALLAS
LTR Normal
Note: If the entry doesn't have a Location
• When the other machine answers, your fax transmits the document directly from
memory. (To review Memory transmission, see page 2.3.)
3.4
, or on the glass.
ADF FBS
and the document's width and resolution settings:
ID
, the number appears.
ID
and the document's width and resolution settings:
ID
, the number appears.
ID
If you specified real time transmission:
• Your fax machine dials the other fax machine.
• The shows the Location and the document's width and resolution settings:
LCD ID
PB DALLAS
LTR Normal
Note: If the entry doesn't have a Location
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review Real time transmission, see page 2.3.)
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your Imagistics sales office to order an
optional handset.)
To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the handset
• Press / to use the monitor speaker (on-hook-dialing)
MONITOR CALL
2
Press the one-touch key in which you've stored the number. As the machine
dials, it shows the number on the
** Tel Mode **
9-555-1212_
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used
hang up.
, the number appears.
ID
:
LCD
/ to dial, press
MONITOR CALL MONITOR
/ to
CALL