Printer options
Note: These options appear only if the optional printer controller has been installed.
Print the Demo Page
The demo page provides a demonstration that highlights the features and functions
of the printer.
To print the demo page:
1
Press Program key,
, 2, 0, 1.
E
01 Demo Page
/ /Enter
2
Press
to print the demo page.
ENTER
Print the Printer Configuration Page
The printer configuration page provides all the status and configuration of the
printer.
To print the printer configuration page:
1
Press Program key,
, 2, 0, 2.
E
02 Status Page
/ /Enter
2
Press
to print the printer configuration page.
ENTER
Print PCL Font List
The PCL font list provides a list of all PCL fonts currently installed in the printer.
To print the PCL font list:
1
Press Program key,
, 2, 0, 3.
E
03 Font List
/ /Enter
2
Press
to print the PCL font list.
ENTER
Print NIC status
Note: To access this function, the optional NIC (Network Interface Card) is
required.
To print the NIC status:
1
Press Program key,
, 2, 0, 4.
E
04 NIC Status
/ /Enter
2
Press
to print the NIC status.
ENTER
Set TCP/IP Address
Note: To access this function, the optional NIC (Network Interface Card) is
required.
When you using the TCP/IP protocol, enter an IP Address, Subnet mask and default
Getaway.
To print the PCL font list:
1
Press Program key,
, 4, 0, 1.
B
01 TCP/IP
/ /Enter
2
Press
. The
will show:
ENTER
LCD
Set IP Address
000.000.000.000
3
Enter the IP Address for your printer using the numeric keypad, then press
to save the setting.
ENTER
For example, your printer's IP Address is 200.1.37.47, you should press
2 0 0 0 0 1 0 3 7 0 4 7.
Changing the default settings
4.11