imagistics DL170 Operating Manual page 102

Advanced features
5
Press until "Store Document" appears.
Type :Store Document
/ /Enter
6
Press . The asks which storing menu you want to program into the
ENTER LCD
programmable one-touch:
P2:Polling Document
/ /Enter
7
Press until the mode you want appears.
8
Press .
ENTER
If you select the "Polling Document" operation, skip to step 14.
If you select the "F-Code Document" operation, go on to step 9.
9
The asks which F-Code bulletin box you want to use.
LCD
Select F-Code Box
01:Imagistics US
10
Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box in which you want to store the document. Here, we've entered
0, 3:
Select F-Code Box
03:Imagistics UK
11
To select a different F-Code box than the one that appears on the
that box number now.
12
Press . The asks if you want the box to overwrite (erase) any docu-
ENTER LCD
ments it is currently storing whenever it stores a new document.
Overwrite Doc.
/ /Enter
On: When your machine stores a new document into this box, it will over-
write documents stored in it.
Off: When your machine stores a new document into this box, it won't erase
(overwrite) any documents stored in it. Your machine can store up to 30
documents in each box (each document can include one or more pages).
13
Press until the mode you want appears.
Then press to save the setting.
ENTER
3.48
:Off
14
The asks if you want to program additional settings for this one-touch.
LCD
Option
If you do not want to program additional settings, press
If you do want to program additional settings, press
to step 15.
15
The asks which resolution you want each time you use this programma-
LCD
ble one-touch number.
Resolution
16
Press until the mode you want appears.
Note: For any of the following settings, choosing "---" tells the machine to
use its default setting for this programmable one-touch key.
17
Press
ENTER
this programmable one-touch number.
Contrast
18
Press until the mode you want appears.
19
Press
ENTER
time you use this programmable one-touch number.
, enter
LCD
Fax & Copy
20
Press until the mode you want appears.
21
Press
ENTER
22
Press
STOP
:Off
/ /Enter
:------
/ /Enter
. The asks which contrast mode you want each time you use
LCD
:-------
/ /Enter
. The asks if you want the Fax & Copy feature on or off each
LCD
:---
/ /Enter
.
to return your machine to standby mode.
. Go to step 22.
ENTER
and , then go on
ENTER