Special Copy Function - imagistics DL170 Operating Manual

Basic operation
Adjust image contrast
Setting the contrast allows you to compensate for light or darkness, of the document
being copied.
To change the contrast setting, press
The indicates the machine setting.
LED
Note: To avoid confusing the Light and Dark settings, just
remember — "Light lightens" and "Dark darkens" — to
keep it straight.
Sort copy setting
Default setting: On
Helpful tip: If you frequently turn this feature off and on, you can set a Soft key
(see page 3.17) to turn on or off by simply pressing that key.
1
Press Program key, , 3, 0, 6.
B
2
Press .
ENTER
The shows the current setting:
LCD
Sort Copy
/ /Enter
3
Press or until the setting you want appears.
In this example, we've chosen Off.
Sort Copy
/ /Enter
4
Press to save the setting.
ENTER
2.16
repeatedly.
CONTRAST
:On
:Off

Special copy function

Negative/Positive (reversing black and white areas)
If using this feature, the black and white areas of the original are reversed.
DARK
Note: You cannot combine this feature with Reduced or Enlarged copies.
NORMAL
Helpful tip: You can program a Soft key to turn on or off this feature.
LIGHT
1
Make sure the machine is in the Copy mode.
CONTRAST
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing the
4
Press
ADVANCED FUNCTIONS
Nega/Posi
Note: The default setting for this feature is Off. However, you can set the
default to On. (See page 4.7.)
5
Press
In this example, we've chosen On.
Nega/Posi
6
Press
ENTER
with following display:
Copy <Nega/Posi>
Ltr
7
If needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
8
Press
START
Note: To reset the copy parameter to default setting, press
Note: To stop copying, press
DOCUMENT SIZE
, . The
ENTER LCD
:Off
/ /Enter
or until the setting you want appears.
:On
/ /Enter
to save the setting. The machine returns to the standby mode
1
[ Ltr ] 100%
.
.
STOP
.
shows the current setting:
.
COPY RESET