imagistics DL170 Operating Manual page 93

5
Press until "Communication" appears.
Type :Communication
/ /Enter
6
Press . The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7
Use the numeric keypad to enter up to 230 fax numbers — you can use any
combination of call groups, one-touch keys, speed-dial numbers and manu-
ally-dialed numbers.
Important: Do not press
ENTER
Press to enter a comma between each number or call group.
BROADCAST
Important: Do not insert a comma after the last number.
To enter a speed-dial number, press
three-digit identifier.
To enter a call group, press
GROUP DIAL
P2:Fax#/Advan.Func.
G5,G7,[01],S006,9-55
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or
8
If you want the broadcast to begin immediately every time you press the key,
press and skip to step 11.
ENTER
If you want to delay the broadcast, press
9
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
P2:Fax#/Advan.Func.
or
9-5558743_
.
/ and the number's
SPEED DIAL TEL INDEX
and the group's identifier number.
to scroll to the right.
,
ADVANCED FUNCTIONS ENTER
on the 30th.")
PM
Option 2:
10
Press ,
ENTER
11
The asks if you want to make additional settings for this programmable
LCD
one-touch number.
Option
If you do not want to make additional settings, press
23.
If you do want to make additional settings, press
12
The asks which resolution you want to use for this programmable one-
LCD
touch number.
Resolution
13
Press until the mode you want appears.
Note: For any of the following settings, choose "-----" if you want to use the
default value for this programmable one-touch key.
14
Press . The
ENTER
.
ble one-touch number.
Contrast
15
Press until the mode you want appears.
16
Press . The
ENTER
set for this programmable one-touch number.
Report
17
Press until the report you want appears.
Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
PM
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
.
ENTER
:Off
/ /Enter
:------
/ /Enter
asks you to select a contrast mode for each programma-
LCD
:-------
/ /Enter
asks you for the type of confirmation report you want to
LCD
:---
/ /Enter
Advanced features
today.")
. Then skip to step
ENTER
and .
ENTER
3.39