imagistics DL170 Operating Manual page 130

Just in case ...
Printouts have irregularities
ABCDE
• The paper you're using may have absorbed moisture, per-
haps due either to high humidity or water having been
ABCDE
spilled on the paper supply. Toner will not adhere well to
ABCDE
wet paper.
Replace the paper with dry paper and try printing again.
ABCDE
ABCDE
Printouts have white and/or black lines
ABCDE
• The toner cartridge or drum cartridge may be defective.
Remove the toner and drum, and check them for damage.
ABCDE
If the problem persists, replace either or both out as indi-
ABCDE
cated.
• The LED print head may be dirty.
ABCDE
Using the cleaning paper, gently clean the LED print head.
ABCDE
• The charger may be dirty.
Your machine normally cleans the charger automatically.
If other solutions fail, please contact your authorized
Imagistics dealer.
5.4
Printouts have toner smudges
ABCDE
• The toner may be unevenly distributed inside the toner
cartridge.
ABCDE
Remove the toner cartridge and shake it a few times to
ABCDE
redistribute the toner inside. If the problem persists, replace
the cartridge.
ABCDE
• The toner cartridge or drum cartridge may be defective.
ABCDE
Remove the toner and drum, and check them for damage. If
the problem persists, replace either or both remove outz as
indicated.
• If you find smudges on the back of the printouts, the trans-
port roller may be dirty.
Your machine normally cleans the transport roller automat-
ically. If other solutions fail, please contact the Imagistics
Diagnostic Center.
Printouts have white spots
ABCDE
• The charger may be dirty.
Your machine normally cleans the charger automatically.
ABCDE
If other solutions fail, please contact your authorized
ABCDE
Imagistics dealer.
ABCDE
ABCDE