imagistics DL170 Operating Manual page 105

6
If you want security reception to begin now (and at this same time every day),
skip to step 8.
Otherwise, go on to step 7.
7
Use the numeric keypad to enter the time (use a 24-hour format) when secu-
rity reception should begin every day. "Type over" the numbers displayed.
Here, we've entered 17:35:
Security Rx
Enter Time: 17:35
To change a digit, press to move to the left, or
the correct digit.
8
Press to save the setting.
ENTER
Helpful tip: After setting for activating security reception, you can assign security
reception to the Soft key (see page 3.17) to turn it on and off. Turning
on security reception by pressing a Soft key turns on security recep-
tion immediately not the time setting you entered at step 7.
To turn the security reception on by pressing a soft key:
1
Program a Soft key for security reception. (See page 3.17.)
2
Press a Soft key that is assigned for security reception.
Enter Passcode :****
3
Enter the protection passcode and then press
The briefly shows following and the
LCD
security reception begins immediately.
** Sec. Rx Active **
Note: To turn security reception off, see "Printing from security reception/Turning
off security reception," next column.
to move right. Then enter
.
ENTER
of the Soft key will light and
LED
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine's
memory and the light comes on. The incoming fax message is not
MEMORY RECEIVE
printed.
To print the faxes received during security reception (and to return your machine to
normal reception until the next time):
1
Press Program key, , 3, 0, 4,
D
If you using the Soft key, press the Soft key instead of this operation.
In which way, the shows:
LCD
Security Rx Doc.
Enter Passcode :****
2
Use the numeric keypad to enter the passcode. Here we've entered 6296:
Security Rx Doc.
Enter Passcode :6296
3
Press .
ENTER
• If you've entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you've scheduled security reception or the
Soft key which programmed security reception is pressed.
If you using the Soft key, the
• If you've entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Advanced features
ENTER
light of the Soft key will be off.
LED
3.51