imagistics DL170 Operating Manual page 21

2
While pressing the release lever,
slide the paper length guide to the
position for the paper size you
want to use.
3
Press down the paper lifting plate.
4
Insert the paper into the cassette.
• Before you insert paper in the
cassette, stack it so the leading
edge and sides of the paper are
even.
• Do not stack the paper over the
limit mark inside of the cas-
sette.
• Place the edges of the top sheet
under the metal tabs on the
cassette's left and right side.
5
Adjust the paper guides to fit the
size of paper.
6
Gently push the paper cassette back into its original (closed) position. You'll
feel a click when it's properly in place.
7
Attach the paper size sticker on the cassette's front.
Helpful Tip: The paper level indicator on the
front paper cassette lets you see
how much paper is in the cassette
without your having to open the cas-
sette. When you see the paper level
indicator drop (i. e., show more blue
area), make sure you have a supply
of paper nearby. Then, when you see
the "Please Supply Paper" message
on the display, you'll be ready to
refill the cassette.
Important: To avoid paper jams, do not refill this paper cassette without first
removing any remaining paper. In other words, do not just add sheets
to an already—-loaded stack.
Setting of the Paper Size
Default setting: Ltr (Letter—-sized paper)
When you change the size of paper in the paper cassette, you must also change the
paper size setting, below.
1
Press Program key, , 1, 0, 1,
B
1st Cassette :Ltr
/ /Enter
2
Press or until the recording paper size for the first cassette you want
appears. In this example, we've chosen Legal.
1st Cassette :Legl
/ /Enter
3
Press .
ENTER
If you have the optional second cassette, proceed to step 4.
Otherwise, skip to step 6.
4
Press or until the recording paper size for the second cassette you want
appears. In this example, we've chosen half letter .
2nd Cassette :HLtr
/ /Enter
5
Press .
ENTER
Paper level
indicator
. The shows:
ENTER LCD
Getting started
1.9