imagistics DL170 Operating Manual page 49

Combine
This feature allows you to copying from four one-sided originals to one sheet of
paper.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing the
4
Press twice,
ADVANCED FUNCTIONS
Combine :Off
/ /Enter
Note: This feature is Off for default setting. However, you can turn on it for
the default. (See page 4.7.)
5
Press or until the setting you want appears.
In this example, we've chosen On.
Combine :On
/ /Enter
6
Press to save the setting. The machine will return to the standby mode
ENTER
with following display:
Copy <Combine>
Ltr [ Ltr ] 100%
7
If needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
• Set copy reduction or enlargement ratio
8
Press .
START
Note: To reset the copy parameter to default setting, press
Note: To stop copying, press .
STOP
.
DOCUMENT SIZE
. The shows the current setting:
ENTER LCD
1
COPY RESET
Ultra copy mode
Note: Enlargement/Reduction copy is not available in this mode.
Note: This mode requires more memory than normal mode.
This feature allows copying with more high quality resolution.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing
4
Press
ADVANCED FUNCTIONS
setting:
Ultra Copy
5
Press or
In this example, we've chosen On.
Ultra Copy
6
Press
ENTER
with following display:
Copy <Ultra Copy>
Ltr
7
If needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
8
Press
START
Note: To reset the copy parameter to default setting, press
.
Note: To stop copying, press
DOCUMENT SIZE
three times, . The
ENTER
:Off
/ /Enter
until the setting you want appears.
:On
/ /Enter
to save the setting. The machine will return to the standby mode
1
[ Ltr ] 100%
.
.
STOP
Basic operation
.
shows the current
LCD
.
COPY RESET
2.17