Table of Contents
Advertisement
Getting started
Function table
Level one function
Level two function
A. Autodial Entries
1.One—-touch Dial
2.Speed Dial
3.Program One—-Touch 01.Enter P One—-Touch
B. User Settings
1.Machine Settings
2.Fax Settings
*1: This option appears only if the optional 2—-Bin tray has been installed.
1.14
Level three function
Summary of setting
01.Enter One—-Touch
Select one—-touch key and register the fax dial numbers and names,
(Max. 55 locations.)
also group numbers on one—-touch dial keys.
If you register the name, you can use the telephone index feature.
If you register the group number, you can use the group dialing.
02.Erase One—-Touch
Erase the registration in a one—-touch key.
01.Enter Speed—-Dial
Select speed—-dial number and register the fax dial numbers and
(Max. 145 locations.)
names, also group numbers as Speed—-Dial numbers.
If you register the name, you can use the telephone index feature.
If you register the group number, you can use the group dialing.
02.Erase Speed—-Dial
Erase the registration in a speed—-dial number.
Program several operations for a function you frequently use.
This key can reduce several steps to a simple press of a key.
02.Erase P One—-Touch
Erase the programming in a programmable one—-touch key.
01.Cassette Size
Select the size of paper in the paper cassette.
02.Protect Passcode
Enter the protection passcode for using the security features.
03.Soft Key
Program to turn on or off any functions with just pressing this key.
04.Silent Mode
Mute your machine.
05.Sleep Mode
Conserve power.
06.Fax & Copy
Make a copy of your document each time it transmit.
07.Primary Mode
Determine the primary mode, Fax mode or Copy mode.
08.Service Mode
For technical support. Do not set this setting to on unless an
authorized technician asks you to do so.
09.2—-Bin Tray*
1
Select the paper tray for delivery.
• Copy exit
• Received fax document exit
• List exit
• PC—-Fax print exit*
01.Scan Parameters
You can set the following settings for send fax message.
• Primary resolution mode
• Primary contrast mode
02.Print Parameter
You can set the following settings for receive fax message.
• Reduction rate
• Reduction margin
• Half—-page reception
2
*2: This option appears only if the optional RS-232C interface has been installed.
Default setting
Page
—-
3.2
—-
3.3
—-
3.5
—-
3.6
—-
3.36
—-
3.49
Letter
1.9
—-
3.50
Report
Memory Tx
3.17
Monitor/Call
Off
4.8
On (30 min.)
4.9
Off
3.21
None
4.9
Off
—-
Lower tray
Upper tray
4.9
Upper tray
Upper tray
Normal
4.1
Normal
Auto
4.3
40 mm
Off
Advertisement
Chapters
Table of Contents
