Call Request - imagistics DL170 Operating Manual

To use on your fax machine:
DRD
1
Contact your phone company to make sure it has set up
possible, also find out which distinctive ring pattern the phone company has
assigned you.
2
Press Program key, , 2, 1, 5,
B
The shows:
LCD
DRD :Off
/ /Enter
3
Press or until the mode you want appears.
Here, we've chosen On.
DRD :On
/ /Enter
4
Press .
ENTER
Ring Pattern
/ /Enter
5
Press or until the pattern you want appears.
Here, we've chosen " ".
C
Ring Pattern
/ /Enter
6
Press to set your machine to the displayed ring pattern.
ENTER
Important: If your telephone company gives you only very general ring pattern
specifications, or if you encounter a problem while using your
machine's feature, please try
DRD
If you still have a problem after trying all of the patterns, please call
the Imagistics Service at 1 800.243.5556
Important: With your machine set for
other than the one you selected above. To reset the fax so it will
respond once again to normal rings, repeat steps 2–4, above — except,
in step 3, toggle it to "Off." Your fax will now respond normally.

Call request

You can send or receive a fax message and have a regular phone conversation on the
same call (although, not at the same time). This is called a call request. It doesn't
matter whether you're sending the fax or receiving it. You may fax first and then
talk, or talk first and then fax.
service for you. If
DRD
.
ENTER
:A
:C
of the listed ring patterns.
ALL
, it won't respond to any ring pattern
DRD
Important: For this feature to work, the remote fax machine must have a similar
call-request capability. Your machine must also have an optional
handset attached.
Faxing/receiving first, then talking
To send or receive a fax first and then talk:
1
While your fax machine is sending or receiving the fax, press
2
At the remote fax machine, the ringer will sound after that machine receives
each page.
3
If someone answers at the remote fax machine, your fax machine will ring
several times. If so, pick up the optional handset. In a few seconds, the line
will open and you can begin your conversation.
Talking first, then sending a fax
To talk first and then send a fax:
1
When you've finished your phone conversation, don't hang up.
2
Insert the document you want to fax.
3
Adjust the resolution and contrast if necessary.
4
Tell the person at the other fax machine to press
his/her handset. Don't hang up your handset yet!
5
When you hear fax tones, press
optional handset. Your fax machine will send the document.
Talking first, then receiving a fax
To talk first and then receive a fax:
1
When you've finished your phone conversation, don't hang up.
2
Tell the person at the other fax machine to press
his/her handset. Don't hang up your handset yet!
3
When you hear fax tones, press
handset. Your machine will receive the document and print it out.
Responding to a call request
If someone requests a call from you during a fax communication, you'll hear a long
ring after the receiving machine has received each page. To answer the call request:
Advanced features
MONITOR
and to hang up
START
and hang up your fax machine's
START
and to hang up
START
and hang up your machine's optional
START
/ .
CALL
3.25