Sending A Fax Using Monitor/Call Key Or A Handset - imagistics DL170 Operating Manual

Basic operation
12
At the end of the operation, your fax machine beeps and displays:
919725552009
** Complete
Important: Whenever you transmit a document, what actually appears on
the top line of the display depends on information stored in the
remote fax. The line may even be blank.
Note: If the call fails, see "Redialing," page 2.7.
2.6
**
Sending a fax using
MONITOR
You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: In this function, you cannot send a fax using the
1
Insert the document to the
ADF
2
Adjust resolution and contrast if necessary.
3
Obtain a dial tone, either by:
• Pressing /
MONITOR CALL
... or ...
• Lifting the optional handset.
In either case, the shows:
LCD
** Tel Mode **
_
4
Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
** Tel Mode **
919725552009_
5
When you hear fax tones from the remote unit, press
Note: If a person answers the phone, use the optional handset to tell that
person that you're trying to send a fax. When you hear fax tones,
press .
START
6
If you're using an optional handset, hang up after pressing
7
At the end of the operation, your fax machine beeps and displays:
919725552009
** Complete
Note: If the call fails and you used
/ to hang up. Or if you've pressed
MONITOR CALL
transmission, press
STOP
Also see "Redialing manually," next page, if the call fails.
/ key or a handset
CALL
glass.
FBS
.
.
START
.
START
**
/ to dial, press
MONITOR CALL
to begin the fax
START
to end it.