Table of Contents
Advertisement
Settings for dialing
Changing the dialing pause length
Default setting: 2 seconds.
The pause is set by the factory to last two seconds, but you can set it to last as long
as ten seconds if necessary. To change the pause length:
1
Press Program key,
, 2, 0, 5,
B
Dialing Pause
Time
(02-10):02
2
Use the numeric keypad to enter the length you want for the dialing pause.
Here, we've chosen nine seconds.
Dialing Pause
Time
(02-10):09
Note: The length setting requires two digits. Always enter a leading zero for
lengths less than 10 seconds.
3
Press
to save the setting.
ENTER
.
ENTER
Changing redial settings
Default setting: Number of redial: 2 times, Redial interval: 1 minute.
It's up to you how many times the fax redials a number and how long it waits
between redials (that length of time between calls is the redial interval).
To program the redial settings:
1
Press Program key,
, 2, 0, 4,
B
# Of Redials
#
(02-15):02
2
Use the numeric keypad to enter the number of redials you want. Choose
from 2 to 15 redials. In this example, we've entered 03.
# Of Redials
#
(02-15):03
Note: Enter a leading zero when entering a quantity less than 10.
3
Press
to save the setting.
ENTER
4
The
now shows:
LCD
Redial Interval
Interval
(1-5):1
5
Use the numeric keypad to enter the length you want between redial
attempts. Choose from 1 to 5 minutes. In this example, we've chosen 4.
Redial Interval
Interval
(1-5):4
6
Press
to save the setting.
ENTER
Changing the default settings
.
ENTER
4.5
Advertisement
Chapters
Table of Contents
