imagistics DL170 Operating Manual page 96

Advanced features
Note: If changing a previously stored command, skip to step 7.
5
Press until "Communication" appears.
Type :Communication
¬ /® /Enter
6
Press . The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number
can be up to 40 characters in length:
P2:Fax#/Advan.Func.
9-5550629_
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or
Important: Do not press
8
Now, while you still can see the fax number on the
three times and then press
FUNCTIONS
Enter Sub-Address
_
9
Use the numeric keypad to enter the
you want to send the document. Here, we've entered 123456:
Enter Sub-Address
123456_
10
Press . The shows:
ENTER LCD
Enter Password
_
Note: If there isn't a password for this box, press
11
Use the numeric keypad to enter the appropriate
Here, we've entered 654321:
Enter Password
654321_
When finished, press
ENTER
3.42
P2:Fax#/Advan.Func.
9-5558743_
or
to scroll to the right.
.
ENTER
, press
LCD ADVANCED
. The shows:
ENTER LCD
- sub-address for the box to which
ITU T
, then skip to step 13.
ENTER
- password for the box.
ITU T
.
12
If you want the transmission to begin immediately every time you press the
key, press and skip to step 15.
ENTER
If you want to delay the transmission, press
13
Next, tell your fax to carry out this delayed command one of these ways:
Option 1 Monthly: Perform the command once at a certain time on a cer-
tain day of the month. (For example, "Do this on the 30th at
5:05 .")
PM
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2 Daily: Perform the command at a certain time each day you
press the key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax should perform the command:
Delayed
Enter Time: 00/17:05
14
Press , .
ENTER ENTER
15
The asks if you want to make additional settings for this programmable
LCD
one-touch number.
Option :Off
/ /Enter
If you do not want to make additional settings, press
If you do want to make additional settings, press
16
The asks which resolution you want to use for this programmable one-
LCD
touch number.
Resolution :------
/ /Enter
17
Press until the mode you want appears.
Note: For any of the following settings, choose "-----" if you want to use the
default setting for this programmable one-touch key.
, .
ADVANCED FUNCTIONS ENTER
today.")
PM
. Skip to step 29.
ENTER
and .
ENTER