Table of Contents
Advertisement
Getting started
EasyStart (Initial settings)
EasyStart software is already installed on your Imagistics fax machine. It guides
you through the process of entering your machine's settings.
These settings you make here can always be changed later.
Getting started
Determine the following before you go any further:
1
The type of dialing your telephone system requires —- Choose either tone
or pulse (rotary) dialing.
2
The name and fax number you want to appear on your faxes —-
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page. This text lists a name, called the Transmit
Terminal Identifier (
), and a fax number. The
TTI
characters.
Clearing stored settings
Before using EasyStart, clear your machine's built—-in user data memory. This
ensures the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an
authorized technician asks you to do so.
To clear the machine's memory:
1
Press Program key, *, 2. The
Clear User Settings
Check
Enter/Cancel
Note: If you don't want to clear the memory, just press
2
If you do want to clear the memory, press
1.18
cannot be longer than 22
TTI
now asks if you want to clear the memory:
LCD
.
CANCEL
.
ENTER
Entering initial settings
Important: If you press
during EasyStart, your fax machine returns to
STOP
standby mode (its normal condition). But it will keep the settings you
saved by pressing
ENTER
1
Press Program key,
,
I
ENTER
The
shows the current language setting.
LCD
Language
:English
/ /Enter
2
Press
or
until the language you want appears.
3
Press
to save the setting and continue EasyStart.
ENTER
4
The
now shows the current calendar/clock setting, with a cursor appear-
LCD
ing under the first digit.
Enter Time
01/01 '01 00:00
5
Use the numeric keypad to enter the correct date and time, using a
format for the date and 24—-hour format for the time. For instance, to set 8:30
on June 11, 2000, press 0 6 1 1 0 0 2 0 3 0, which results in:
PM
Enter Time
06/11 '00 20:30
Note: Your fax machine automatically inserts the spaces and date—-slash.
All you have to do is enter the digits.
To change a digit, press
to move the cursor left, or
Then enter the correct digit.
6
Press
to save the clock setting and continue.
ENTER
as described in these instructions.
.
to move it right.
MMDDYY
Advertisement
Chapters
Table of Contents
