Attach The Paper-Handling Parts; Plug In And Power Up - imagistics DL170 Operating Manual

Attach the paper—-handling parts
1
Attach the document tray by inserting it into the appropriate holes, as shown.
2
Attach the extension paper tray by inserting its two pegs at a slightly upward
angle into the appropriate holes, as shown.

Plug in and power up

1
Plug one end of the telephone line cord into the
rear side and the other end into a standard telephone wall jack.
2
Plug the non—-pronged end of the AC power cord into the AC power cord jack
on the right rear side of the machine and the pronged end into a 120 V electri-
cal outlet (preferably on a surge suppressor, as mentioned on page 1.5).
3
Use the AC power switch to turn on your machine. The markings are interna-
tional standards: I means on, O means off.
It will take a few seconds for the machine to warm up. The
** Warming Up **
When the machine is ready to use (standby mode), you will see:
Fax Ready
Jan 1 2001
jack on the machine's
LINE
shows:
LCD
0:00
Getting started
1.7