Selv Power - Polycom 4000 Hardware Manual

RealPresence®Collaboration Server 4000 Hardware Guide
1 Make sure that the power button is switched OFF on the RMX 4000.
2 Insert the power cables into the power connectors on the rear panel of the RMX 4000.
Connecting the RealPresence Collaboration Server (RMX) 4000 to -48DC SELV
Power
Perform the following steps to connect the RealPresence Collaboration Server (RMX) 4000 to -48CD SELV
power.
1 On the DC Power Rail Modules (PRM's), set the two circuit breakers to OFF. For more information
on circuit breaker types, see
Collaboration Server (RMX) 4000
2 Ensure that the cables from the Main that supplies electricity to the DC power units are OFF or
disconnected.
3 Remove the transparent plastic caps on the terminal block.
Polycom, Inc.
Types of DC Circuit Breakers installed on the RealPresence
.
34