Polycom 4000 Hardware Manual page 66

Realpresence collaboration server

Hide thumbs Also See for 4000:

Table of Contents

RealPresence®Collaboration Server 4000 Hardware Guide

3 Push the card into the slot until the ejector levers touch the front edge of the card cage. Push the

ejector levers to their fully closed position.

4 Tighten the captive screws on each side of the rear panel of the card, securing the RTM ISDN card

to the MCU.

5 Connect the RJ-45 terminated PRI cables into any of the slots labeled PRI1 - PRI12.

7 E1 or 9 T1 cables can be connected to each RTM ISDN card, up to a total of 14 E1 or 18 T1 PRI

cables when a maximum of two RTM ISDN cards are installed.

Polycom, Inc.

Table of Contents

Need help?

Do you have a question about the 4000 and is the answer not in the manual?

Realpresence rmx 4000