Realpresence Collaboration Server (Rmx) 4000 Rear Panel - Polycom 4000 Hardware Manual

RealPresence®Collaboration Server 4000 Hardware Guide
Card Configuration Mode Selection During Startup / Restart
When the MCU is started with Version 8.3 installed and no media cards, the RMX is set to MPMRx Card
Configuration Mode by default
.
• The switch between Card Configuration Modes occurs during the next restart.
• Installing or swapping MPMx/MPMRx cards while the system is off will not cause a switch in the
Card Configuration Mode when the system is restarted – it will restart in the Card Configuration
Mode that was active previous to powering down.

RealPresence Collaboration Server (RMX) 4000 Rear Panel

The RMX 4000 rear panel contains the RTM-IP 4000 card and either (or both) RTM ISDN/RTM LAN card(s).
In order for an MPMx/MPMRx card to function (i.e. video) one of the RTM boards, either a LAN or ISDN
card MUST be present in a rear panel slot opposite to an MPMx/MPMRx card.
A single RTM-IP 4000 card must also be located on slot 17 in the rear of the RMX 4000. In addition, the rear
panel houses the main AC power switch, AC Power Entry Modules (PEMs) or DC Power Rail Modules
(PRMs), and additional communications ports.
RMX 4000 AC Rear View
Polycom, Inc. 42